Need a fuse board upgrade in Burgess Hill? Voltrade electricians install modern consumer units to meet current safety standards.
If your home still has an old-style fuse board with rewirable fuses or lacks RCD protection, upgrading to a modern consumer unit is one of the most important electrical safety improvements you can make.
A modern consumer unit with RCBOs or RCDs can detect dangerous faults and cut the power in milliseconds, protecting you and your family from electric shock and reducing the risk of electrical fires.
You should consider upgrading if your fuse board still uses rewirable fuses (wire wrapped around a holder), if your consumer unit does not have RCD protection, if your fuses blow or trips happen frequently, if you are having your home rewired or adding new circuits, or if you are a landlord and your EICR has flagged the fuse board as unsatisfactory.
A fuse board upgrade in Burgess Hill typically takes 4 to 8 hours depending on the complexity of your installation. The electrician will isolate the power, remove the old fuse board, install the new consumer unit, test all circuits, and issue an electrical installation certificate. There will be a planned power outage during the work.
Tell us what's wrong. Our GoFIX AI analyses your description and estimates the likely fault.
Choose a time that works for you. Pay the call-out fee securely online. No surprises.
A qualified, vetted electrician arrives at the booked time with the right tools and parts.
All prices in pounds including call-out fee. Parts quoted separately where applicable. Actual costs depend on the specific fault.
Voltrade members pay from 99 pounds call-out. Non-members pay from 149 pounds. Our GoFIX AI provides a specific cost estimate before you book.
No. A fuse board upgrade is classed as electrical maintenance and does not require planning permission or building regulations approval in most cases. The installation certificate serves as your compliance document.
Signs include: rewirable fuses (ceramic holders with wire), a wooden back board, no RCD protection (test buttons), frequent blown fuses, scorch marks, a burning smell, or if the board is more than 25 years old.
Modern consumer units with RCDs and MCBs provide significantly better protection against electric shock and electrical fires than old fuse boxes with rewirable fuses. If your property still has an old-style fuse box, upgrading is one of the most important electrical safety improvements you can make.
A standard consumer unit upgrade takes 4 to 6 hours for a typical West Sussex home. This includes removing the old board, fitting the new one, testing every circuit, and issuing an electrical installation certificate.
The new consumer unit fits in the same location as the old one in most cases. There may be minor making good needed around the board area. We do not need to access other rooms unless we find a wiring fault during testing.
Describe the problem and our AI estimates the fault before an engineer visits.
Book This Repair